Products Serviced / Franz Kessler / DMR060.20-661.422

Motor Type: DMR060.20-661.422

Manufacturer: Franz Kessler

Exchange: Non inventory. Please call or email for repair options.

Franz Kessler DMR060.20-661.442 spindle motor for DMG Mori Seiki Milltap 700 machine. Repaired and tested by Endeavor Technologies.

The Franz Kessler DMR060.20 motor part number 000.661.422 is a highly specialized water cooled motor made for the DMG Mori Seiki Milltap 700 machine.

Choosing us to rebuild your Franz Kessler motor DMR060.20-661.422 ensures that it will meet your expectations for performing like a new motor.

After disassembly and cleaning, the windings will be checked with a cutting edge winding analyzer.  Critical mechanical dimensions will be measured with micrometers, and all test results become part of the permanent record of the motor in our database.

If the motor winding has failed, the old winding will be carefully stripped and rewound to the original data according to our demanding winding process.

Worn mechanical components will be fabricated or refurbished by our expert machinists.  Our machine shop is fully equipped with lathes, mills, and precision grinding equipment.

Rotating components will be precision balanced on one of our Schenck Trebel hard bearing balancing machines.

New bearings with special lubrication features, O-rings, and any other required parts will be installed during assembly.  Finally the motor will be subjected to our thorough test protocol, run-in to full speed, checked for excessive noiseor temperature, and the vibration spectrums recorded.

All test data becomes part of our database, and a link to the final service report will be emailed to you upon request.

 

« Back to Franz Kessler All Manufacturers