Products Serviced / NUM / BPH1423N5PA2C01

Motor Type: BPH1423N5PA2C01

Manufacturer: NUM

Exchange: Non inventory. Please call or email for repair options.

Send your NUM AC servo motor BPG1423N5PA2C01 to Endeavor Technologies to be repaired right the first time!
Choosing us through NUM U.S.A. to rebuild your BPH1423N5PA2C01 motor ensures that it will first be carefully evaluated to determine if it is faulty.

Throughout all aspects of the rebuild process, our technicians are guided by the NUM factory supplied repair manual. 

If the motor winding has failed, the old winding will be replaced with a new factory part, or rewound with factory data according to our demanding winding process

Worn mechanical components will be replaced with new, or re-furbished by our expert machinists.  Our machine shop is fully equipped with lathes, mills, and precision grinding equipment.  

Rotating components will be precision balanced on one of our Schenck Trebel hard bearing balancing machines. 

New bearings, seals, and any other required parts will be installed during assembly. Mechanical assembly tolerances such as shaft and flange runout will be verified to be within factory tolerances.  
Finally the motor will be subjected to our thorough test protocol, test run on a NUM controller, and checked for excessive noise or temperature, and vibration levels recorded.  

All test data becomes part of our database, and a link to the final service report will be emailed to you upon request.  

« Back to NUM All Manufacturers