Manufacturer: Fanuc
Exchange: In Stock
Endeavor Technologies specializes in rebuilding spindle motors such as the Fanuc A06B-1637-B120 used to drive the live tooling spindles of the Mori Seiki NT machines. Rated for 10000 rpm, the A06B-1637-B120 is a built-in, liquid cooled spindle motor utilizing sealed angular contact bearings. Service to this special motor should not be attempted by unqualified or inexperienced personnel!
After carefully inspecting your A06B-1637-B120 and determining what parts are required, we’ll work with the Mori Seiki distributor to supply factory original parts. We will upgrade the winding with our Epox-E-Pak insulation system to better protect it against contamination and extend its life expectancy. High speed motors in demanding applications such as the A06B-1637-B120 require that nearly all surfaces that capture bearings—shaft diameters, bearing bores, bearing retaining caps, etc… are precision ground to tight tolerances to minimize run out and vibration in the assembled motor. Endeavor Technologies has the capabilities in our machining department to refurbish these parts to like-new condition when replacements aren’t available.
After dynamic balancing, your built-in motor A06B-1637-B120 will be assembled with all new O-rings and pressure tested before being run-in to full speed with our simulator. Vibration levels, bearing temperature readings, shaft TIR and other mechanical assembly details are all checked and recorded. Don’t entrust the service of this critical machine component to someone less experienced and qualified. Contact Endeavor Technologies about rebuilding your Fanuc motor A06B-1637-B120 today!
