Manufacturer: Control Techniques
Exchange: Non-inventory. Call or email for rebuild options
Your Control Techniques motor 089U2B600BAARA100190 will be carefully evaluated by experienced technicians to determine if it is faulty. Motor Ke (back e.m.f.), brake torque, and encoders or resolvers will all be tested with a variety of diagnostic instruments. After disassembly and cleaning, the windings will be checked with a digital surge tester, and DC hi-pot. Critical mechanical dimensions will be measured with micrometers, and all test results become part of the permanent record of the motor in our database.
If the motor winding has failed, the old winding will be carefully reverse engineered before being stripped with a mechanical stripping method that prevents any damage to the insulated core. A new winding utilizing class H magnet wire and all class H insulation will be installed.
Worn mechanical components will be fabricated or re-furbished by our expert machinists. Our machine shop is fully equipped with lathes, mills, and precision grinding equipment. Rotating components will be precision balanced on one of our Schenck Trebel hard bearing balancing machines. New bearings, seals, and any other required parts will be installed during assembly, and the feedback device will be aligned and tested. Mechanical assembly tolerances such as shaft and flange runout will be verified to be within factory tolerances.
Finally, the motor will be test run, checked for excessive noise or temperature, and vibration levels recorded. All test data becomes part of our database, and a link to the final service report will be emailed to you upon request.
