Manufacturer: Fanuc
Exchange: In Stock
Endeavor Technologies specializes in rewinding built-in spindle motors such as the A06B-1229-B901 employed in the Hitachi CH-250 sub-spindle, and other machines.
Our winding process is carefully engineered to ensure that your motor type A06B-1229-B901 is rewound without the risk of damage to the laminated core that is inherent in the process used by most “repair shops”. This is particularly important in the case of this Fanuc motor A06B-1229-B901 because the lamination stack is bonded with a thermally cured adhesive before being precision ground to fit into the water jacket. The “burn-off” process commonly employed by winding repair shops will destroy the bonding agent.
Many built-in spindle motors can benefit from the addition of our Epox-E-Pak insulation system, and the A06B-1229-B901 is no exception. This robust after-market modification protects your motor against failure from the contamination that often permeates the machining process.
Endeavor Technologies is experienced and equipped to assemble built-in motors into water jackets and into machine headstocks or other castings. We stock hundreds of large O-rings, and pressure test all completed assemblies to ensure that refrigerant will not leak into your motor or into your machine from the cooling jacket of the motor.
If you have had your spindle motor A06B-1229-B901 rewound and continue to have problems with performance or service life it’s not too late! Endeavor Technologies can solve your problem—contact us today!
