Manufacturer: Mori Seiki
Exchange: Non-inventory. Call or email for rebuild options
Endeavor Technologies is experienced and fully equipped to rebuild the failed DDM150-4000 live tooling motor from your NL4000 or NLX4000 Mori Seiki lathe. This motor is Mori Seiki’s part number TU0048B01.
Damage to the magnet rotor is common, particularly if a live tool has been crashed. We have replacement magnets in inventory, and will quickly rebuild the failed magnet rotor.
If the motor winding has failed, the old winding will be carefully stripped and rewound to the original data according to our demanding winding process.
Worn mechanical components will be fabricated or re-furbished by our expert machinists, or replaced with new components supplied by Mori Seiki. Our machine shop is fully equipped with lathes, mills, and precision grinding equipment.
Rotating components will be precision balanced on one of our Schenck Trebel hard bearing balancing machines.
New bearings, seals, and any other required parts will be installed during assembly. Mechanical assembly tolerances such as shaft and flange runout will be verified to be within factory tolerances. Finally the motor will be subjected to our thorough test protocol, run-in to full speed, checked for excessive noise or temperature, and the vibration spectrums recorded.
All test data becomes part of our database, and a link to the final service report will be emailed to you upon request.
